Strike Finder™

$99.00

Strike Finder™ and one cable are included, choose your camera make and model below so we can include the proper cable.

Clear
SKU: 741 Categories: ,

Description

The original Strike Finder™ camera trigger was designed to capture lightning strikes either day or night. It uses microcontroller-based technology along with an infrared sensor to capture the most stunning photographs with complete ease! The device mounts onto the camera hotshoe so you can walk away and let it do all of the hard work.

Depending on the storm, lightning flashes can last for several hundred milliseconds (ms) and contain dozens of strokes each occurring approximately 40 milliseconds apart. The Strike Finder™ has a response time in microseconds level but total lag time depends on your camera’s shutter lag time .

Disclaimer
• Lightning can be DANGEROUS. Remember Safety First!

•The Strike Finder™ is not waterproof. It should be treated and handled with the care of a camera and should not be dropped and/or exposed to extremes of heat or moisture.

 

 

Additional information

Weight .25 lbs
Dimensions 4.94 x 2.75 x 1.25 in
Recommended Settings

Keep camera "awake". Read your manual to prevent it from going into hibernate mode. Set the lens to MF (manual focus) Set the camera to shutter or aperture mode. Do not use the Auto. Night use recommended settings : 0.3"-1/8", f 1.8 – 7.1 adjust as needed Day use recommended settings : 1/8" – 1/30", f 1.8 – 7.1 adjust as needed ISO 200 – 400 • Extremely sensitive optical sensor to detect lightning events • Hot shoe mount for mounting the device directly to your camera • Power indicator LED • Powered by a 9V battery (includes battery) Compact size • Length : 4.4 in • Width : 2.6 in •Height : .83 in

Your original Strike Finder™ ships with the following items in the box:

• Strike Finder™ Original
• Camera cable
• One 9 volt battery

You may also like…